Invalid SPEC® CPU2017 Integer Speed Result
Copyright 2017-2024 Standard Performance Evaluation Corporation
Benchmark result graphs are available in the PDF report.
Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/lib64:/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/lib::/usr/lib64/:/usr/lib/:/lib64"
Sysinfo program /notnfs/vmakarov/spec2017/bin/sysinfo
Rev: r5797 of 2017-06-14 96c45e4568ad54c135fd618bcc091c0f
running on to-ryzen.usersys.redhat.com Thu Jun 20 16:56:58 2024
SUT (System Under Test) info as seen by some common utilities.
For more information on this section, see
https://www.spec.org/cpu2017/Docs/config.html#sysinfo
From /proc/cpuinfo
model name : AMD Ryzen 7 3800X 8-Core Processor
1 "physical id"s (chips)
16 "processors"
cores, siblings (Caution: counting these is hw and system dependent. The following
excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
cpu cores : 8
siblings : 16
physical 0: cores 0 1 2 3 4 5 6 7
From lscpu:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 43 bits physical, 48 bits virtual
CPU(s): 16
On-line CPU(s) list: 0-15
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 1
NUMA node(s): 1
Vendor ID: AuthenticAMD
CPU family: 23
Model: 113
Model name: AMD Ryzen 7 3800X 8-Core Processor
Stepping: 0
Frequency boost: enabled
CPU MHz: 2432.362
CPU max MHz: 3900.0000
CPU min MHz: 2200.0000
BogoMIPS: 7785.39
Virtualization: AMD-V
L1d cache: 256 KiB
L1i cache: 256 KiB
L2 cache: 4 MiB
L3 cache: 32 MiB
NUMA node0 CPU(s): 0-15
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Not affected
Vulnerability Mds: Not affected
Vulnerability Meltdown: Not affected
Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via
prctl and seccomp
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user
pointer sanitization
Vulnerability Spectre v2: Mitigation; Full AMD retpoline, IBPB conditional,
STIBP always-on, RSB filling
Vulnerability Tsx async abort: Not affected
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid
aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave
avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse
3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext
perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate sme ssbd mba sev ibpb stibp vmmcall
fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni
xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local
clzero irperf xsaveerptr rdpru wbnoinvd arat npt lbrv svm_lock nrip_save tsc_scale
vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload
vgif umip rdpid overflow_recov succor smca
/proc/cpuinfo cache data
cache size : 512 KB
From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a
physical chip.
From /proc/meminfo
MemTotal: 32889052 kB
HugePages_Total: 0
Hugepagesize: 2048 kB
From /etc/*release* /etc/*version*
fedora-release: Fedora release 31 (Thirty One)
os-release:
NAME=Fedora
VERSION="31 (Workstation Edition)"
ID=fedora
VERSION_ID=31
VERSION_CODENAME=""
PLATFORM_ID="platform:f31"
PRETTY_NAME="Fedora 31 (Workstation Edition)"
ANSI_COLOR="0;34"
redhat-release: Fedora release 31 (Thirty One)
system-release: Fedora release 31 (Thirty One)
system-release-cpe: cpe:/o:fedoraproject:fedora:31
uname -a:
Linux to-ryzen.usersys.redhat.com 5.5.11-200.fc31.x86_64 #1 SMP Mon Mar 23 17:32:43
UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
run-level 3 2024-06-02 10:19
SPEC is set to: /notnfs/vmakarov/spec2017
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/fedora_localhost--live-home ext4 372G 95G 259G 27% /home
Additional information from dmidecode follows. WARNING: Use caution when you interpret
this section. The 'dmidecode' program reads system data which is "intended to allow
hardware to be accurately determined", but the intent may not be met, as there are
frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
(End of data from sysinfo program)
==============================================================================
CXXC 620.omnetpp_s(base, peak) 623.xalancbmk_s(base, peak)
631.deepsjeng_s(base, peak) 641.leela_s(base, peak)
------------------------------------------------------------------------------
Using built-in specs.
COLLECT_GCC=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/bin/g++
COLLECT_LTO_WRAPPER=/home/vmakarov/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/bin/../libexec/gcc/x86_64-pc-linux-gnu/15.0.0/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with:
/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/src/configure
--prefix=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen
--srcdir=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/src
--disable-bootstrap --disable-libcilkrts --enable-checking=release
--enable-languages=c,c++,fortran
Thread model: posix
Supported LTO compression algorithms: zlib
gcc version 15.0.0 20240620 (experimental) (GCC)
------------------------------------------------------------------------------
==============================================================================
CC 600.perlbench_s(base, peak) 602.gcc_s(base, peak) 605.mcf_s(base, peak)
625.x264_s(base, peak) 657.xz_s(base, peak)
------------------------------------------------------------------------------
Using built-in specs.
COLLECT_GCC=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/bin/gcc
COLLECT_LTO_WRAPPER=/home/vmakarov/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/bin/../libexec/gcc/x86_64-pc-linux-gnu/15.0.0/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with:
/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/src/configure
--prefix=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen
--srcdir=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/src
--disable-bootstrap --disable-libcilkrts --enable-checking=release
--enable-languages=c,c++,fortran
Thread model: posix
Supported LTO compression algorithms: zlib
gcc version 15.0.0 20240620 (experimental) (GCC)
------------------------------------------------------------------------------
==============================================================================
FC 648.exchange2_s(base, peak)
------------------------------------------------------------------------------
Using built-in specs.
COLLECT_GCC=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/bin/gfortran
COLLECT_LTO_WRAPPER=/home/vmakarov/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen/bin/../libexec/gcc/x86_64-pc-linux-gnu/15.0.0/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with:
/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/src/configure
--prefix=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/inst.to-ryzen
--srcdir=/notnfs/vmakarov/perf/sbox/gcc/local.spec2017.x86_64/src
--disable-bootstrap --disable-libcilkrts --enable-checking=release
--enable-languages=c,c++,fortran
Thread model: posix
Supported LTO compression algorithms: zlib
gcc version 15.0.0 20240620 (experimental) (GCC)
------------------------------------------------------------------------------
600.perlbench_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
|
602.gcc_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
|
605.mcf_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
|
620.omnetpp_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
|
623.xalancbmk_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
|
625.x264_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
|
631.deepsjeng_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
|
641.leela_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
|
648.exchange2_s: |
"-fallow-argument-mismatch" (in FC)
"-fallow-argument-mismatch" (in LD)
|
657.xz_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
|
600.perlbench_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
"-flto" (in OPTIMIZE)
|
602.gcc_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
"-flto" (in OPTIMIZE)
|
605.mcf_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
"-flto" (in OPTIMIZE)
|
620.omnetpp_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
"-flto" (in OPTIMIZE)
|
623.xalancbmk_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
"-flto" (in OPTIMIZE)
|
625.x264_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
"-flto" (in OPTIMIZE)
|
631.deepsjeng_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
"-flto" (in OPTIMIZE)
|
641.leela_s: |
"-fcommon -std=c++14" (in CXX)
"-fcommon -std=c++14" (in LD)
"-flto" (in OPTIMIZE)
|
648.exchange2_s: |
"-fallow-argument-mismatch" (in FC)
"-fallow-argument-mismatch" (in LD)
"-flto" (in OPTIMIZE)
|
657.xz_s: |
"-fcommon" (in CC)
"-fcommon" (in LD)
"-flto" (in OPTIMIZE)
|
Same as Base Portability Flags